Customized Lifting Solutions
Engineered to order • Engineer consultation required
Engineered coil handling lift for lifting and positioning coils with controlled support and orientation, configured around the load, site interface and operating duty.
How this system works
Shrusti Coil Handling Lift is an engineered special transfer system for lifting and positioning coils with controlled support and orientation. It is best suited to steel, stamping and process operations where coil geometry and centre of gravity require a dedicated cradle or mandrel. The final configuration is not selected from a fixed SKU; it is defined around the actual load, operating route, duty cycle and site interface. During the engineering review, Shrusti confirms part drawings and load centre, process sequence, pickup and placement interface, upstream and downstream equipment, then develops the arrangement, controls, guarding and installation scope around the approved application. Options such as purpose-built fixture or cradle, lift, tilt, rotate or transfer motion, platform, rollers, rails or tooling can be incorporated where technically appropriate. Final capacity, dimensions, power and performance parameters are issued through the quotation and approved drawing package.
Technical specification framework
| System type | Coil Handling Lift |
|---|---|
| Drive / operation | Hydraulic or electric by process |
| Installation / mounting | Custom coil-positioning station |
| Configuration status | Engineered to order — indicative engineering range published |
| Payload | 0.5–10 t |
| Load geometry | Coil OD 500–2500 mm, ID 300–760 mm, width 200–2000 mm |
| Fixture | V-cradle, expandable mandrel, turntable or tilting cradle |
| Lift / transfer stroke | 300–2000 mm |
| Table / platform / tooling | Cradle/tooling envelope 800 × 800 to 3000 × 2200 mm |
| Controls | 24 V pendant/foot controls; PLC-ready sequence control and HMI optional |
| Sensors | Upper/lower limits, proximity sensors and load/pressure monitoring options |
| Guarding | 900–1100 mm rails, interlocked gates, toe guards or full enclosure as required |
| Integration points | Decoiler, press line, pallet, rack or transfer trolley |
| Power supply | 415 V AC 3-phase; 230 V AC or 24/48 V DC for selected compact systems |
| Environment | Indoor industrial; scale, oil and abrasion-resistant finishes available |
| Cycle time | 30–120 s per positioning cycle |
| Specification basis | Indicative engineering range for early evaluation; final rating is confirmed in the Shrusti technical offer and approved drawing |
RFQ inputs required
Applications and industries
Safety and site readiness
Comparison
| Variant | Drive | Mounting | Primary application |
|---|---|---|---|
| Die Handling Lift | Hydraulic or electric by process | Custom press or tool-room interface | Lifting, positioning and transferring dies and tooling |
| Coil Handling Lift | Hydraulic or electric by process | Custom coil-positioning station | Lifting and positioning coils with controlled support and orientation |
| Assembly Line Lift | Hydraulic or electric by process | Integrated production-line station | Matching component or fixture height within an assembly process |
FAQs
The Coil Handling Lift is sized from the actual load, required movement or coverage, duty cycle and site interface. Final capacity and dimensions are confirmed after Shrusti reviews part drawings and load centre, process sequence, pickup and placement interface, upstream and downstream equipment.
Engineer consultation required. A survey or engineer review is used to verify dimensions, support conditions, access, power, operating clearances and installation constraints before the final quotation.
Share part drawings and load centre, process sequence, pickup and placement interface, upstream and downstream equipment, cycle time, safety and guarding requirements. Layouts, photographs and existing drawings help the engineering team produce a more accurate initial proposal.
Yes. The scope can be configured around purpose-built fixture or cradle, lift, tilt, rotate or transfer motion, platform, rollers, rails or tooling, hydraulic or electric drive, sensors and control sequence, subject to engineering review and the approved drawing.
Safety provisions are selected for the application and may include guarding, access control, limits, emergency controls, restraints or structural checks. The final list is stated in the technical offer and approved scope.
Yes. The quotation can include installation, testing, commissioning, operator handover, AMC and spares support where these services are required for the project.
Shrusti Coil Handling Lift is an engineered system used for lifting and positioning coils with controlled support and orientation. Its capacity, dimensions, drive, controls and installation interface are selected from the published engineering range and confirmed in the technical offer.
Shrusti Coil Handling Lift is quote-led and engineered to order. The final specification is based on load, route, duty cycle, site structure, access and safety requirements rather than a fixed online configuration.
Use Request Quote or Book Site Survey and share the load, dimensions, movement path, operating frequency and site photographs. Shrusti will convert those inputs into a technical proposal and approved configuration.
Why Shrusti
Shrusti has engineered material-handling and lifting systems from Chennai since 1985. Each quote-led system is developed around the application, supported by site-survey-led configuration, installation and commissioning planning, and lifecycle service through AMC and spares support.
Next step
