Goods Lifts
Engineered to order • Required
Engineered electric goods lift for higher-frequency floor-to-floor movement using a motorised lifting system, configured around the load, site interface and operating duty.
How this system works
Shrusti Electric Goods Lift is an engineered vertical transfer system for higher-frequency floor-to-floor movement using a motorised lifting system. It is best suited to operations that prefer electric drive, braking and configured travel speed over hydraulic operation. The final configuration is not selected from a fixed SKU; it is defined around the actual load, operating route, duty cycle and site interface. During the engineering review, Shrusti confirms load weight and dimensions, floor levels and total travel, clear opening and access sides, available shaft or pit, then develops the arrangement, controls, guarding and installation scope around the approved application. Options such as platform dimensions and load interface, number of stops and access sides, cabin, mesh enclosure or guarded platform can be incorporated where technically appropriate. Final capacity, dimensions, power and performance parameters are issued through the quotation and approved drawing package.
Technical specification framework
| System type | Electric Goods Lift |
|---|---|
| Drive / operation | Motorised electric drive |
| Installation / mounting | Fixed guided lift |
| Configuration status | Engineered to order — indicative engineering range published |
| Rated capacity | 0.5–5 t |
| Travel height | 3–20 m |
| Number of stops | 2–8 stops |
| Platform L × W | 1500 × 1500 to 3000 × 3000 mm |
| Cabin / guarding | 900–1100 mm guardrails, mesh enclosure or full-sheet cabin; interlocked access options |
| Mast / column type | Single, twin-mast or four-column guided structure |
| Motor / power pack | 3–20 HP geared electric drive with fail-safe brake |
| Power supply | 415 V AC, 3-phase, 50 Hz; 230 V option for selected light-duty configurations |
| Doors / gates | Swing, sliding, collapsible or mesh gates with landing interlocks |
| Controls | 24 V call/hold stations, up/down controls and emergency stop; automatic landing control optional |
| Pit / shaft | 250–800 mm pit or raised landing arrangement |
| Travel speed | 0.10–0.30 m/s |
| Safety devices | Overload/pressure relief, hose-burst or anti-drop protection, limit switches, gate interlocks and emergency stop |
| Specification basis | Indicative engineering range for early evaluation; final rating is confirmed in the Shrusti technical offer and approved drawing |
RFQ inputs required
Applications and industries
Safety and site readiness
Comparison
| Variant | Drive | Mounting | Primary application |
|---|---|---|---|
| Four Column Goods Lift | Hydraulic or electric by design | Enclosed four-column structure | Guarded multi-stop material transfer for heavier or larger loads |
| Electric Goods Lift | Motorised electric drive | Fixed guided lift | Higher-frequency floor-to-floor movement using a motorised lifting system |
| Goods Cum Passenger Lift | Engineered drive to approved scope | Fully enclosed controlled-access lift | Goods movement with a controlled attendant-access requirement where legally and technically permitted |
FAQs
The Electric Goods Lift is sized from the actual load, required movement or coverage, duty cycle and site interface. Final capacity and dimensions are confirmed after Shrusti reviews load weight and dimensions, floor levels and total travel, clear opening and access sides, available shaft or pit.
Required. A survey or engineer review is used to verify dimensions, support conditions, access, power, operating clearances and installation constraints before the final quotation.
Share load weight and dimensions, floor levels and total travel, clear opening and access sides, available shaft or pit, power supply, goods-only or controlled attendant access. Layouts, photographs and existing drawings help the engineering team produce a more accurate initial proposal.
Yes. The scope can be configured around platform dimensions and load interface, number of stops and access sides, cabin, mesh enclosure or guarded platform, hydraulic or electric drive philosophy, door and gate configuration, subject to engineering review and the approved drawing.
Safety provisions are selected for the application and may include guarding, access control, limits, emergency controls, restraints or structural checks. The final list is stated in the technical offer and approved scope.
Yes. The quotation can include installation, testing, commissioning, operator handover, AMC and spares support where these services are required for the project.
Shrusti Electric Goods Lift is an engineered system used for higher-frequency floor-to-floor movement using a motorised lifting system. Its capacity, dimensions, drive, controls and installation interface are selected from the published engineering range and confirmed in the technical offer.
Shrusti Electric Goods Lift is quote-led and engineered to order. The final specification is based on load, route, duty cycle, site structure, access and safety requirements rather than a fixed online configuration.
Use Request Quote or Book Site Survey and share the load, dimensions, movement path, operating frequency and site photographs. Shrusti will convert those inputs into a technical proposal and approved configuration.
Why Shrusti
Shrusti has engineered material-handling and lifting systems from Chennai since 1985. Each quote-led system is developed around the application, supported by site-survey-led configuration, installation and commissioning planning, and lifecycle service through AMC and spares support.
Next step
