Goods Lifts
Engineered to order • Engineer consultation required
Engineered goods cum passenger lift for goods movement with a controlled attendant-access requirement where legally and technically permitted, configured around the load, site interface and operating duty.
How this system works
Shrusti Goods Cum Passenger Lift is an engineered vertical transfer system for goods movement with a controlled attendant-access requirement where legally and technically permitted. It is best suited to applications that require a formal review of access, enclosure, doors, interlocks and local approval obligations. The final configuration is not selected from a fixed SKU; it is defined around the actual load, operating route, duty cycle and site interface. During the engineering review, Shrusti confirms load weight and dimensions, floor levels and total travel, clear opening and access sides, available shaft or pit, then develops the arrangement, controls, guarding and installation scope around the approved application. Options such as platform dimensions and load interface, number of stops and access sides, cabin, mesh enclosure or guarded platform can be incorporated where technically appropriate. Final capacity, dimensions, power and performance parameters are issued through the quotation and approved drawing package.
Technical specification framework
| System type | Goods Cum Passenger Lift |
|---|---|
| Drive / operation | Engineered drive to approved scope |
| Installation / mounting | Fully enclosed controlled-access lift |
| Configuration status | Engineered to order — indicative engineering range published |
| Rated capacity | 0.5–2 t combined rated load |
| Travel height | 3–20 m |
| Number of stops | 2–8 stops |
| Platform L × W | 1100 × 1100 to 2000 × 2000 mm cabin |
| Cabin / guarding | Full-height enclosed cabin with interlocked landing doors and controlled attendant access |
| Mast / column type | Fully enclosed guided cabin with twin-mast or four-column support |
| Motor / power pack | 5–20 HP hydraulic or geared electric drive |
| Power supply | 415 V AC, 3-phase, 50 Hz; 230 V option for selected light-duty configurations |
| Doors / gates | Swing, sliding, collapsible or mesh gates with landing interlocks |
| Controls | 24 V call/hold stations, up/down controls and emergency stop; automatic landing control optional |
| Pit / shaft | 450–1200 mm pit with enclosed shaft and landing-door interfaces |
| Travel speed | 0.15–0.50 m/s |
| Safety devices | Door interlocks, emergency stop, overload protection, upper/lower limits, anti-drop protection and controlled rescue provision |
| Specification basis | Indicative engineering range for early evaluation; final rating is confirmed in the Shrusti technical offer and approved drawing |
RFQ inputs required
Applications and industries
Safety and site readiness
Comparison
| Variant | Drive | Mounting | Primary application |
|---|---|---|---|
| Electric Goods Lift | Motorised electric drive | Fixed guided lift | Higher-frequency floor-to-floor movement using a motorised lifting system |
| Goods Cum Passenger Lift | Engineered drive to approved scope | Fully enclosed controlled-access lift | Goods movement with a controlled attendant-access requirement where legally and technically permitted |
FAQs
The Goods Cum Passenger Lift is sized from the actual load, required movement or coverage, duty cycle and site interface. Final capacity and dimensions are confirmed after Shrusti reviews load weight and dimensions, floor levels and total travel, clear opening and access sides, available shaft or pit.
Engineer consultation required. A survey or engineer review is used to verify dimensions, support conditions, access, power, operating clearances and installation constraints before the final quotation.
Share load weight and dimensions, floor levels and total travel, clear opening and access sides, available shaft or pit, power supply, goods-only or controlled attendant access. Layouts, photographs and existing drawings help the engineering team produce a more accurate initial proposal.
Yes. The scope can be configured around platform dimensions and load interface, number of stops and access sides, cabin, mesh enclosure or guarded platform, hydraulic or electric drive philosophy, door and gate configuration, subject to engineering review and the approved drawing.
Safety provisions are selected for the application and may include guarding, access control, limits, emergency controls, restraints or structural checks. The final list is stated in the technical offer and approved scope.
Yes. The quotation can include installation, testing, commissioning, operator handover, AMC and spares support where these services are required for the project.
Shrusti Goods Cum Passenger Lift is an engineered system used for goods movement with a controlled attendant-access requirement where legally and technically permitted. Its capacity, dimensions, drive, controls and installation interface are selected from the published engineering range and confirmed in the technical offer.
Shrusti Goods Cum Passenger Lift is quote-led and engineered to order. The final specification is based on load, route, duty cycle, site structure, access and safety requirements rather than a fixed online configuration.
Use Request Quote or Book Site Survey and share the load, dimensions, movement path, operating frequency and site photographs. Shrusti will convert those inputs into a technical proposal and approved configuration.
Why Shrusti
Shrusti has engineered material-handling and lifting systems from Chennai since 1985. Each quote-led system is developed around the application, supported by site-survey-led configuration, installation and commissioning planning, and lifecycle service through AMC and spares support.
Next step
