Goods Lifts
Engineered to order • Required
Engineered hydraulic goods lift for controlled floor-to-floor material movement, configured around the load, site interface and operating duty.
How this system works
Shrusti Hydraulic Goods Lift is an engineered vertical transfer system for controlled floor-to-floor material movement. It is best suited to factories, stores and mezzanine transfer where smooth lifting and straightforward service are priorities. The final configuration is not selected from a fixed SKU; it is defined around the actual load, operating route, duty cycle and site interface. During the engineering review, Shrusti confirms load weight and dimensions, floor levels and total travel, clear opening and access sides, available shaft or pit, then develops the arrangement, controls, guarding and installation scope around the approved application. Options such as platform dimensions and load interface, number of stops and access sides, cabin, mesh enclosure or guarded platform can be incorporated where technically appropriate. Final capacity, dimensions, power and performance parameters are issued through the quotation and approved drawing package.
Technical specification framework
| System type | Hydraulic Goods Lift |
|---|---|
| Drive / operation | Hydraulic power pack |
| Installation / mounting | Fixed guided lift |
| Configuration status | Engineered to order — indicative engineering range published |
| Rated capacity | 0.5–10 t |
| Travel height | 3–50 m |
| Number of stops | 2–11 stops |
| Platform L × W | 900 × 900 to 3000 × 3000 mm |
| Cabin / guarding | 900–1100 mm guardrails, mesh enclosure or full-sheet cabin; interlocked access options |
| Mast / column type | Single mast, twin mast or four-column guided steel structure |
| Motor / power pack | 3–20 HP electro-hydraulic power pack |
| Power supply | 415 V AC, 3-phase, 50 Hz; 230 V option for selected light-duty configurations |
| Doors / gates | Swing, sliding, collapsible or mesh gates with landing interlocks |
| Controls | 24 V call/hold stations, up/down controls and emergency stop; automatic landing control optional |
| Pit / shaft | 200–600 mm pit, or pitless/ramp arrangement where the layout permits |
| Travel speed | 50–100 mm/s |
| Safety devices | Overload/pressure relief, hose-burst or anti-drop protection, limit switches, gate interlocks and emergency stop |
| Specification basis | Indicative engineering range for early evaluation; final rating is confirmed in the Shrusti technical offer and approved drawing |
RFQ inputs required
Applications and industries
Safety and site readiness
Comparison
| Variant | Drive | Mounting | Primary application |
|---|---|---|---|
| Hydraulic Goods Lift | Hydraulic power pack | Fixed guided lift | Controlled floor-to-floor material movement |
| Single Mast Goods Lift | Hydraulic guided lift | Compact single-mast installation | Vertical transfer where available floor and wall space are limited |
FAQs
The Hydraulic Goods Lift is sized from the actual load, required movement or coverage, duty cycle and site interface. Final capacity and dimensions are confirmed after Shrusti reviews load weight and dimensions, floor levels and total travel, clear opening and access sides, available shaft or pit.
Required. A survey or engineer review is used to verify dimensions, support conditions, access, power, operating clearances and installation constraints before the final quotation.
Share load weight and dimensions, floor levels and total travel, clear opening and access sides, available shaft or pit, power supply, goods-only or controlled attendant access. Layouts, photographs and existing drawings help the engineering team produce a more accurate initial proposal.
Yes. The scope can be configured around platform dimensions and load interface, number of stops and access sides, cabin, mesh enclosure or guarded platform, hydraulic or electric drive philosophy, door and gate configuration, subject to engineering review and the approved drawing.
Safety provisions are selected for the application and may include guarding, access control, limits, emergency controls, restraints or structural checks. The final list is stated in the technical offer and approved scope.
Yes. The quotation can include installation, testing, commissioning, operator handover, AMC and spares support where these services are required for the project.
Shrusti Hydraulic Goods Lift is an engineered system used for controlled floor-to-floor material movement. Its capacity, dimensions, drive, controls and installation interface are selected from the published engineering range and confirmed in the technical offer.
Shrusti Hydraulic Goods Lift is quote-led and engineered to order. The final specification is based on load, route, duty cycle, site structure, access and safety requirements rather than a fixed online configuration.
Use Request Quote or Book Site Survey and share the load, dimensions, movement path, operating frequency and site photographs. Shrusti will convert those inputs into a technical proposal and approved configuration.
Why Shrusti
Shrusti has engineered material-handling and lifting systems from Chennai since 1985. Each quote-led system is developed around the application, supported by site-survey-led configuration, installation and commissioning planning, and lifecycle service through AMC and spares support.
Next step
