Static Scissor Lift Tables
Engineered to order • Required
Engineered pit mounted scissor lift table for flush-floor loading and transfer between carts, pallets, docks or process levels, configured around the load, site interface and operating duty.
How this system works
Shrusti Pit Mounted Scissor Lift Table is an engineered load positioning system for flush-floor loading and transfer between carts, pallets, docks or process levels. It is best suited to applications where the lowered platform must align with the surrounding floor. The final configuration is not selected from a fixed SKU; it is defined around the actual load, operating route, duty cycle and site interface. During the engineering review, Shrusti confirms load type and load distribution, loading and unloading method, required floor or dock height, pit availability, then develops the arrangement, controls, guarding and installation scope around the approved application. Options such as platform length, width and surface, closed and raised height, single or multi-scissor arrangement can be incorporated where technically appropriate. Final capacity, dimensions, power and performance parameters are issued through the quotation and approved drawing package.
Technical specification framework
| System type | Pit Mounted Scissor Lift Table |
|---|---|
| Drive / operation | Electro-hydraulic |
| Installation / mounting | Flush-floor pit installation |
| Configuration status | Engineered to order — indicative engineering range published |
| Rated capacity | 1–20 t |
| Platform size | 1000 × 1000 to 6000 × 3000 mm |
| Closed height | 300–1200 mm |
| Raised height | 1500–8000 mm |
| Lift stroke | 1200–7000 mm |
| Scissor stages | Single to four-stage scissor |
| Cylinder arrangement | 1–4 hydraulic cylinders |
| Power pack | 2.2–15 kW electro-hydraulic, typically 415 V 3-phase |
| Controls | 24 V low-voltage pendant or fixed up/down controls with emergency stop; foot switch optional |
| Pit size | Platform plan + 100–250 mm service clearance; depth 325–1300 mm |
| Lip / ramp | Flush-floor deck; 300–500 mm bridge plate or access ramp optional |
| Guardrails | 900–1100 mm fixed or removable rails with gate; toe guards or bellows optional |
| Specification basis | Indicative engineering range for early evaluation; final rating is confirmed in the Shrusti technical offer and approved drawing |
RFQ inputs required
Applications and industries
Safety and site readiness
Comparison
| Variant | Drive | Mounting | Primary application |
|---|---|---|---|
| Static Scissor Lift Table | Electro-hydraulic | Fixed surface-mounted table | Ergonomic load positioning at a fixed workstation |
| Pit Mounted Scissor Lift Table | Electro-hydraulic | Flush-floor pit installation | Flush-floor loading and transfer between carts, pallets, docks or process levels |
| Loading Lift Table | Electro-hydraulic | Fixed dock or loading interface | Height matching between staging areas, vehicle floors and loading points |
FAQs
The Pit Mounted Scissor Lift Table is sized from the actual load, required movement or coverage, duty cycle and site interface. Final capacity and dimensions are confirmed after Shrusti reviews load type and load distribution, loading and unloading method, required floor or dock height, pit availability.
Required. A survey or engineer review is used to verify dimensions, support conditions, access, power, operating clearances and installation constraints before the final quotation.
Share load type and load distribution, loading and unloading method, required floor or dock height, pit availability, expected cycles per day, indoor or outdoor location. Layouts, photographs and existing drawings help the engineering team produce a more accurate initial proposal.
Yes. The scope can be configured around platform length, width and surface, closed and raised height, single or multi-scissor arrangement, pit-mounted or surface-mounted installation, lip plate, bridge plate or transfer-ready top, subject to engineering review and the approved drawing.
Safety provisions are selected for the application and may include guarding, access control, limits, emergency controls, restraints or structural checks. The final list is stated in the technical offer and approved scope.
Yes. The quotation can include installation, testing, commissioning, operator handover, AMC and spares support where these services are required for the project.
Shrusti Pit Mounted Scissor Lift Table is an engineered system used for flush-floor loading and transfer between carts, pallets, docks or process levels. Its capacity, dimensions, drive, controls and installation interface are selected from the published engineering range and confirmed in the technical offer.
Shrusti Pit Mounted Scissor Lift Table is quote-led and engineered to order. The final specification is based on load, route, duty cycle, site structure, access and safety requirements rather than a fixed online configuration.
Use Request Quote or Book Site Survey and share the load, dimensions, movement path, operating frequency and site photographs. Shrusti will convert those inputs into a technical proposal and approved configuration.
Why Shrusti
Shrusti has engineered material-handling and lifting systems from Chennai since 1985. Each quote-led system is developed around the application, supported by site-survey-led configuration, installation and commissioning planning, and lifecycle service through AMC and spares support.
Next step
