EOT Cranes
Engineered to order • Required
Engineered single girder eot crane for light-to-medium overhead bay movement, configured around the load, site interface and operating duty.
How this system works
Shrusti Single Girder EOT Crane is an engineered overhead lifting system for light-to-medium overhead bay movement. It is best suited to workshops and production bays requiring efficient coverage with a lower structural profile. The final configuration is not selected from a fixed SKU; it is defined around the actual load, operating route, duty cycle and site interface. During the engineering review, Shrusti confirms load weight and geometry, required movement path, building steel and runway information, bay width, then develops the arrangement, controls, guarding and installation scope around the approved application. Options such as span and lift height, hoist and reeving arrangement, single or dual travel speeds can be incorporated where technically appropriate. Final capacity, dimensions, power and performance parameters are issued through the quotation and approved drawing package.
Technical specification framework
| System type | Single Girder EOT Crane |
|---|---|
| Drive / operation | Electric hoist and powered travel |
| Installation / mounting | Overhead runway system |
| Configuration status | Engineered to order — indicative engineering range published |
| Safe working load | 1–10 t |
| Span | 5–25 m |
| Lift height | 6–18 m |
| Hoist type | Electric wire-rope or chain hoist with fail-safe brake |
| Cross travel | 5–20 m/min |
| Long travel | 10–30 m/min |
| Duty class | M3–M5 |
| Control type | Pendant or radio remote; cabin control optional on heavy-duty systems |
| Power supply | 415 V AC, 3-phase, 50 Hz |
| Runway / building support | Building-supported runway beams over 5–25 m bay spans |
| Hook path | Full-bay coverage with approximately 0.5–2.0 m end approaches |
| Safety devices | Overload limiter, upper/lower limits, emergency stop, end stops, buffers and audible/visual warning options |
| Specification basis | Indicative engineering range for early evaluation; final rating is confirmed in the Shrusti technical offer and approved drawing |
RFQ inputs required
Applications and industries
Safety and site readiness
Comparison
| Variant | Drive | Mounting | Primary application |
|---|---|---|---|
| Single Girder EOT Crane | Electric hoist and powered travel | Overhead runway system | Light-to-medium overhead bay movement |
| Double Girder EOT Crane | Electric hoist and powered travel | Heavy-duty overhead runway system | Heavier overhead lifting across wider spans or higher duty cycles |
FAQs
The Single Girder EOT Crane is sized from the actual load, required movement or coverage, duty cycle and site interface. Final capacity and dimensions are confirmed after Shrusti reviews load weight and geometry, required movement path, building steel and runway information, bay width.
Required. A survey or engineer review is used to verify dimensions, support conditions, access, power, operating clearances and installation constraints before the final quotation.
Share load weight and geometry, required movement path, building steel and runway information, bay width, available headroom, required lift height. Layouts, photographs and existing drawings help the engineering team produce a more accurate initial proposal.
Yes. The scope can be configured around span and lift height, hoist and reeving arrangement, single or dual travel speeds, pendant, radio or cabin controls, runway and electrification interface, subject to engineering review and the approved drawing.
Safety provisions are selected for the application and may include guarding, access control, limits, emergency controls, restraints or structural checks. The final list is stated in the technical offer and approved scope.
Yes. The quotation can include installation, testing, commissioning, operator handover, AMC and spares support where these services are required for the project.
Shrusti Single Girder EOT Crane is an engineered system used for light-to-medium overhead bay movement. Its capacity, dimensions, drive, controls and installation interface are selected from the published engineering range and confirmed in the technical offer.
Shrusti Single Girder EOT Crane is quote-led and engineered to order. The final specification is based on load, route, duty cycle, site structure, access and safety requirements rather than a fixed online configuration.
Use Request Quote or Book Site Survey and share the load, dimensions, movement path, operating frequency and site photographs. Shrusti will convert those inputs into a technical proposal and approved configuration.
Why Shrusti
Shrusti has engineered material-handling and lifting systems from Chennai since 1985. Each quote-led system is developed around the application, supported by site-survey-led configuration, installation and commissioning planning, and lifecycle service through AMC and spares support.
Next step
