Gantry Cranes
Engineered to order • Required
Engineered single girder gantry crane for moderate-load lifting where a building runway is unavailable, configured around the load, site interface and operating duty.
How this system works
Shrusti Single Girder Gantry Crane is an engineered freestanding lifting system for moderate-load lifting where a building runway is unavailable. It is best suited to yards, fabrication zones and workshops needing open-span coverage from a self-supporting structure. The final configuration is not selected from a fixed SKU; it is defined around the actual load, operating route, duty cycle and site interface. During the engineering review, Shrusti confirms load weight and geometry, required coverage area, yard or bay dimensions, ground and foundation condition, then develops the arrangement, controls, guarding and installation scope around the approved application. Options such as span, height and travel length, single or double girder arrangement, rail-travelling or fixed configuration can be incorporated where technically appropriate. Final capacity, dimensions, power and performance parameters are issued through the quotation and approved drawing package.
Technical specification framework
| System type | Single Girder Gantry Crane |
|---|---|
| Drive / operation | Manual or powered hoist and travel |
| Installation / mounting | Freestanding gantry |
| Configuration status | Engineered to order — indicative engineering range published |
| Safe working load | 1–20 t |
| Clear span | 5–30 m |
| Lift height | 5–15 m |
| Gantry height | 6–18 m |
| Hoist type | Electric wire-rope or chain hoist |
| Travel type | Rail-travelling or fixed gantry |
| Duty class | M3–M5 |
| Control type | Pendant or radio remote; cabin option for high-capacity systems |
| Power supply | 415 V AC, 3-phase, 50 Hz; manual hoist option for light duty |
| Wheel / rail arrangement | 4–8 flanged wheels on rails; rubber-tyred option for selected mobile duties |
| Foundation / runway | Level RCC rail foundations or fixed pads over 5–30 m rail gauge |
| Safety devices | Overload limiter, travel limits, emergency stop, buffers, rail clamps and storm brakes where outdoor |
| Specification basis | Indicative engineering range for early evaluation; final rating is confirmed in the Shrusti technical offer and approved drawing |
RFQ inputs required
Applications and industries
Safety and site readiness
Comparison
| Variant | Drive | Mounting | Primary application |
|---|---|---|---|
| Single Girder Gantry Crane | Manual or powered hoist and travel | Freestanding gantry | Moderate-load lifting where a building runway is unavailable |
| Double Girder Gantry Crane | Powered hoist and travel | Heavy-duty freestanding gantry | Higher-capacity or wider-span lifting in yards and industrial bays |
FAQs
The Single Girder Gantry Crane is sized from the actual load, required movement or coverage, duty cycle and site interface. Final capacity and dimensions are confirmed after Shrusti reviews load weight and geometry, required coverage area, yard or bay dimensions, ground and foundation condition.
Required. A survey or engineer review is used to verify dimensions, support conditions, access, power, operating clearances and installation constraints before the final quotation.
Share load weight and geometry, required coverage area, yard or bay dimensions, ground and foundation condition, travel path, height restrictions. Layouts, photographs and existing drawings help the engineering team produce a more accurate initial proposal.
Yes. The scope can be configured around span, height and travel length, single or double girder arrangement, rail-travelling or fixed configuration, hoist and control system, cable festoon or electrification method, subject to engineering review and the approved drawing.
Safety provisions are selected for the application and may include guarding, access control, limits, emergency controls, restraints or structural checks. The final list is stated in the technical offer and approved scope.
Yes. The quotation can include installation, testing, commissioning, operator handover, AMC and spares support where these services are required for the project.
Shrusti Single Girder Gantry Crane is an engineered system used for moderate-load lifting where a building runway is unavailable. Its capacity, dimensions, drive, controls and installation interface are selected from the published engineering range and confirmed in the technical offer.
Shrusti Single Girder Gantry Crane is quote-led and engineered to order. The final specification is based on load, route, duty cycle, site structure, access and safety requirements rather than a fixed online configuration.
Use Request Quote or Book Site Survey and share the load, dimensions, movement path, operating frequency and site photographs. Shrusti will convert those inputs into a technical proposal and approved configuration.
Why Shrusti
Shrusti has engineered material-handling and lifting systems from Chennai since 1985. Each quote-led system is developed around the application, supported by site-survey-led configuration, installation and commissioning planning, and lifecycle service through AMC and spares support.
Next step
